Dicktator 60-2 ignition and fuel lights not coming on.

Post Reply
merlinvenn27
Enlisted
Posts: 23
Joined: Sun Mar 30, 2014 3:59 pm
Location: Durban

Dicktator 60-2 ignition and fuel lights not coming on.

Post by merlinvenn27 » Wed Jul 10, 2019 9:25 am

HI Gents I need some assistance pleaswith. I've recently connected up my 60-2 (brand new) to my polo playa (golf 4 apk engine). I've connected all wires as per wiring diagrams and information I've been seeing here on the forum. The red power light comes on and the fuel relay on the management loom clicks on and off after some time as normal. But the other lights aren't coming on. Is there anything I missed along the way? Power and earth are coming directly from the battery. Thank you
DuncanBH
Enlisted
Posts: 17
Joined: Thu May 11, 2017 10:05 pm

Re: Dicktator 60-2 ignition and fuel lights not coming on.

Post by DuncanBH » Wed Jul 10, 2019 9:35 am

Power and earth from battery is correct.but there also needs to be a power and earth connected to the ignition , so I wired mine to the old wiring on ignition coil 3pin like so else you'll have to find ignition relay and join it from there ImageImage

Sent from my TA-1012 using Tapatalk


merlinvenn27
Enlisted
Posts: 23
Joined: Sun Mar 30, 2014 3:59 pm
Location: Durban

Re: Dicktator 60-2 ignition and fuel lights not coming on.

Post by merlinvenn27 » Wed Jul 10, 2019 12:30 pm

Okay my engine hasn't got a distributor. It's got a 4 pin coil pack. I've got an ignition supply to the coil and the coil is earthed to the engine block.
DuncanBH
Enlisted
Posts: 17
Joined: Thu May 11, 2017 10:05 pm

Re: Dicktator 60-2 ignition and fuel lights not coming on.

Post by DuncanBH » Wed Jul 10, 2019 12:52 pm

merlinvenn27 wrote:Okay my engine hasn't got a distributor. It's got a 4 pin coil pack. I've got an ignition supply to the coil and the coil is earthed to the engine block.
I see you say the relay clicks so the pump turns on? Then when you crank nothing happens?

Sent from my TA-1012 using Tapatalk

User avatar
PapaJo
Colonel
Posts: 5377
Joined: Sat Apr 10, 2010 8:01 pm
Car Make: VW
Car Model: '16 Golf 7R, 86 Caddy 16V ITBs
Membership No: missing
Location: Vaal Triangle SA or Vitoria Brazil

Re: Dicktator 60-2 ignition and fuel lights not coming on.

Post by PapaJo » Wed Jul 10, 2019 9:21 pm

You need to use the 60-2 wire diagram. The one posted is not the correct one.

Confirm if the crank sensor is a magnetic sensor and wired to pins 1 and 11 as per 60-2 pinout diagram.

Is there a startup map loaded into the ecu?

The Golf 4 pin coil uses the wasted spark selection in the main page settings and is wired to the ignition 1 and ignition 2 wires on the pinout plug.

Where are you based?
merlinvenn27
Enlisted
Posts: 23
Joined: Sun Mar 30, 2014 3:59 pm
Location: Durban

Re: Dicktator 60-2 ignition and fuel lights not coming on.

Post by merlinvenn27 » Fri Jul 12, 2019 9:19 pm

I loaded a map papajo and it started up. Thank you guys I got the car started and running. All lights are on now. Green flashes with the spark signal
User avatar
PapaJo
Colonel
Posts: 5377
Joined: Sat Apr 10, 2010 8:01 pm
Car Make: VW
Car Model: '16 Golf 7R, 86 Caddy 16V ITBs
Membership No: missing
Location: Vaal Triangle SA or Vitoria Brazil

Re: Dicktator 60-2 ignition and fuel lights not coming on.

Post by PapaJo » Fri Jul 12, 2019 9:38 pm

merlinvenn27 wrote:
Fri Jul 12, 2019 9:19 pm
I loaded a map papajo and it started up. Thank you guys I got the car started and running. All lights are on now. Green flashes with the spark signal
Cool man!
Post Reply