Caddy 1.6 carb TP100

Post Reply
vishaldee
Enlisted
Posts: 4
Joined: Fri Apr 10, 2015 6:27 pm
Car Make: vw
Car Model: 05 caddy mk1
Location: Durban

Caddy 1.6 carb TP100

Post by vishaldee » Wed Jun 13, 2018 7:04 am

Hi Guys
So i have a 2005 caddy bakkie 1.6 carb. Vehicle was starting and dying within seconds....... mech informed me that the TP100 module is blown.
What is required to have one changed out. What is involved in this process......Goldwagen sells them but do they require coding or are they plug and play?
Thanks in advance
User avatar
PapaJo
Lieutenant-Colonel
Posts: 4570
Joined: Sat Apr 10, 2010 8:01 pm
Car Make: VW
Car Model: '16 Golf 7R, 86 Caddy 16V ITBs
Membership No: missing
Location: Vaal Triangle SA or Vitoria Brazil

Re: Caddy 1.6 carb TP100

Post by PapaJo » Wed Jun 13, 2018 10:26 pm

vishaldee wrote:
Wed Jun 13, 2018 7:04 am
Hi Guys
So i have a 2005 caddy bakkie 1.6 carb. Vehicle was starting and dying within seconds....... mech informed me that the TP100 module is blown.
What is required to have one changed out. What is involved in this process......Goldwagen sells them but do they require coding or are they plug and play?
Thanks in advance
2005 model does not have a TP100. The 2004 and ipward models have a 3 pin square coil unless your Caddy was converted to a round bottle coil and TP100. Doyble check first what coil you have.

Replacing a coil (round or square tyoe) does not require recoding.
Post Reply