As always , Jaco @ GW quickly sent us the parts and we got busy.
Pulled the car in the workbay
Coils out
Old plugs out
New plugs ready for install
Bleeding brake lines
Computers have to be used to bleed the ABS pump .
E92 325i Sportpack - spark plug replacement and Brake fluid flush/bleed
-
Rascal69
- VWCSA Member
- Posts: 942
- Registered for: 17 years 2 months
- Car Make: VW
- Car Model: MK1
- Membership No: 1490
- Location: JHB
E92 325i Sportpack - spark plug replacement and Brake fluid flush/bleed
Customer wanted the plugs and brake fluid flushed and bled.
As always , Jaco @ GW quickly sent us the parts and we got busy.
Pulled the car in the workbay
Coils out
Old plugs out
New plugs ready for install
Bleeding brake lines
Computers have to be used to bleed the ABS pump .
As always , Jaco @ GW quickly sent us the parts and we got busy.
Pulled the car in the workbay
Coils out
Old plugs out
New plugs ready for install
Bleeding brake lines
Computers have to be used to bleed the ABS pump .
Current: 2007 ///M Coupe
Current: 2019 Fortuner 4x4
Ex: 2005 E55 AMG
Ex: 1998 BMW M3
Ex: 2011 REVO 2 Focus ST - 208wkw & 465nm's (FRnR)
Ex: 1994 E36 328i Track Car (Budler Motorsport built)
Ex: 2011 REVO 2 Mk6 GTI DSG - 200wkw & 452nm's (KAR)
Ex: 2007 REVO 2+ S3 - 12.7s @ 176km/h (Tarlton 2010) and 224km's on 1km (ODI)
Ex: 2006 Velo 1.6i | 2008 Velo 1.6i | 2005 Velo 1.4i | 2006 Polo 1.6i | 2012 Polo TDI | 2004 W203 C200K
Current: 2019 Fortuner 4x4
Ex: 2005 E55 AMG
Ex: 1998 BMW M3
Ex: 2011 REVO 2 Focus ST - 208wkw & 465nm's (FRnR)
Ex: 1994 E36 328i Track Car (Budler Motorsport built)
Ex: 2011 REVO 2 Mk6 GTI DSG - 200wkw & 452nm's (KAR)
Ex: 2007 REVO 2+ S3 - 12.7s @ 176km/h (Tarlton 2010) and 224km's on 1km (ODI)
Ex: 2006 Velo 1.6i | 2008 Velo 1.6i | 2005 Velo 1.4i | 2006 Polo 1.6i | 2012 Polo TDI | 2004 W203 C200K
-
Unobeat
- Lieutenant-General
- Posts: 8381
- Registered for: 14 years 2 months
- Car Make: Fiat, Toyota, Mazda
- Car Model: Uno, Auris, CX-5
- Location: Pretoria
Re: E92 325i Sportpack - spark plug replacement and Brake fluid flush/bleed
Great work guys
THANAS wrote:Mix them together to create Shellstrol, and then mix that with Winstrol to create the ultimate, maximum performance oil for your engine.
panic-mechanic wrote:When I build engines and do stuff like this I do it when there is nobody else around, No distractions, No phone nothing so that you don't forget what you should be doing. It's the little things that make them run right. Anybody can slap a basic bottom end together. that is the easy bit. It's all the little things that makes these builds a success or not.