Hello to all. Going to put a 288 or 298 cam soon.
Just wanted to know if the head area around the lifters can be cleared without removing the head.
Sent from my SM-G610F using Tapatalk
Clearance around the lifters
- WeirdSteam
- Cadet
- Posts: 353
- Registered for: 9 years 7 months
- Car Make: VW
- Car Model: A3 Sportback 1.8 TFSI
- Location: Cape town
- Contact:
Re: Clearance around the lifters
Yes can be done without removing the head but you have to make sure that you get ALL the metal shavings out as you go otherwise it ends up in your oil and bearings.
Did mine recently for the 288 estas
Sent from my SM-G930F using Tapatalk
Did mine recently for the 288 estas
Sent from my SM-G930F using Tapatalk
- panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 8 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: Clearance around the lifters
Yes pencil grinder and a lot of patience. As mentioned you need to get all the shavings
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
-
- Cadet
- Posts: 309
- Registered for: 11 years 5 months
- Car Make: VW Golf 1
- Car Model: 2.0 h8 valve
- Location: Durban
Re: Clearance around the lifters
288 is a straight fit, well an estas 288
2000 Golf 1 Chico- CRANKCASE [Std 2.0 bottom end, head gas flowed,ported & chopped by Fastcar, 288 Estas Billet, 4-2-1 43mm Brospeed Branch, 50mm-57mm-63mm Exhaust] + THE PART (2B1 speacials) -Final power @ Autotrix 111wkw & 210wnm
2007 Velociti- WHITEWALKER [Std 2.0 bottom end, head gas flowed,ported, valve swirled, 276 Estas, 4-2-1 Branch, 57mm piping from front to back]
2007 Velociti- WHITEWALKER [Std 2.0 bottom end, head gas flowed,ported, valve swirled, 276 Estas, 4-2-1 Branch, 57mm piping from front to back]
- WeirdSteam
- Cadet
- Posts: 353
- Registered for: 9 years 7 months
- Car Make: VW
- Car Model: A3 Sportback 1.8 TFSI
- Location: Cape town
- Contact:
Re: Clearance around the lifters
Nope not on all heads8VALVE-zn wrote:288 is a straight fit, well an estas 288
I have a Estas 288 that iIbought from Panic and the head needed to be clearance d , i have an 2.0 ADY Head 5 Cam caps (Hydro)
- panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 8 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: Clearance around the lifters
Yup some heads need to be clearanced some not.
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.