hi guys
I need some help on good quality brand parts that I will be buying from goldwagen (de la ray branch, they are the closest to me)
Good name brands on new inner cv's with boots
and suspension parts as boil joints, bushes, rubbers ect
car model in my signature
Thanks
on my to do list(suspension parts)
-
caddy club
- Cadet
- Posts: 791
- Registered for: 15 years 10 months
- Car Make: Vw
- Car Model: Caddy AGG 2L Carb
- Membership No: missing
- Location: Jhb
on my to do list(suspension parts)
Caddy Club AGG 2L Carb 1998 model
-
panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 8 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: on my to do list(suspension parts)
Just walk in and ask the saleman for the good stuff and you shall receive.
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
-
Unobeat
- Lieutenant-General
- Posts: 8378
- Registered for: 13 years
- Car Make: Fiat, Toyota, Mazda
- Car Model: Uno, Auris, CX-5
- Location: Pretoria
Re: on my to do list(suspension parts)
Lol Panic
True though.
Sent from my SM-A500F using Tapatalk
True though.
Sent from my SM-A500F using Tapatalk
THANAS wrote:Mix them together to create Shellstrol, and then mix that with Winstrol to create the ultimate, maximum performance oil for your engine.
panic-mechanic wrote:When I build engines and do stuff like this I do it when there is nobody else around, No distractions, No phone nothing so that you don't forget what you should be doing. It's the little things that make them run right. Anybody can slap a basic bottom end together. that is the easy bit. It's all the little things that makes these builds a success or not.