Skimming the head for 288 cam

Servicing and repairs on all VW and Audi models, old and new. The passion is sort of on the old but we also love the newer and can do whatever you need.
Post Reply
raveennaidoo3
Cadet
Posts: 121
Registered for: 8 years 8 months

Skimming the head for 288 cam

Post by raveennaidoo3 »

Hello there. I have a vw 2L8v agg engine running on Dictator with the head flowed, std valves and 282 cam.head is skimmed 0.5mm.
Read on the forum that you have to skim over 1mm to use 288 cam.is this necessary? Can I leave my head at 0.5mm and use the 288 cam.my car is a daily driven car

Sent from my E2303 using Tapatalk
JonaDTD
Cadet
Posts: 645
Registered for: 10 years 9 months
Car Make: Volkswagen
Car Model: 2.0 8V
Location: Cape Town

Re: Skimming the head for 288 cam

Post by JonaDTD »

Will fit on AGG

I'm running one without problems


Sent from my iPhone using Tapatalk
Lemon Citi Ride Thread:
1995 Citi - 2.0 8v, headwork, double valve springs, Estas 288, bigger valves, Dicktator, 4-2-1 branch, 50-57mm progressive exhaust.

Ex ladies:
Polo TDi Sportline 2008 9n3 - GTB2268VK, FMIC, Fuel Cooler, A/C Delete, Interior Delete, Sparco Deep Dish Wheel, 12.9 Head Bolts, Race Pipe, 63mm Exhaust, Full Poly Mounts, Coilovers, blah blah blah. Ride Thread Here: SR Tuned BT TDi
Polo 2.0 Highline 9n3 (90kw 175nm) SOLD
Ford Fiesta 1.6 TDCi (RIP)
raveennaidoo3
Cadet
Posts: 121
Registered for: 8 years 8 months

Re: Skimming the head for 288 cam

Post by raveennaidoo3 »

Did you have to clear the head for the 288 to clear

Sent from my E2303 using Tapatalk
User avatar
missioner
Lieutenant-Colonel
Posts: 4006
Registered for: 10 years 11 months
Car Make: VW
Car Model: '87 MK1 Golf Citi

Re: Skimming the head for 288 cam

Post by missioner »

Skimming the head bumps the compression up for better performance. The cam can run in a standard head without problems, nowhere does it say that skimming a head is mandatory in order to run a warm camshaft.

OP you need to read up on static vs dynamic compression and how they affect your engine.
'87 Golf 1 Olde Skewl OEM+
BlueBlob
Panic's Place
Posts: 4664
Registered for: 22 years 4 months
Location: JHB

Re: Skimming the head for 288 cam

Post by BlueBlob »

raveennaidoo3 wrote:Did you have to clear the head for the 288 to clear

Sent from my E2303 using Tapatalk
That's only an issue with the 298's.
Post Reply