Mp9 coil dicktator and distributor setup connection

[mk1strand]

Hi guys

All the wiring is done just want to know the last thing how do you setup the dicktator without the TP100 module

I read something that you connect the coil and distributor can someone just give clarity on that please and thank you.

its a dicktator standard

[Taz0]

On the mp9 coil
Ground to ground
Positive to ignition
Green / thin wire to dictator trigger out wire

On distributor
Ground to ground
Positive to tps 5v positive
Trigger to dictator trigger in signal wire

[mk1strand]

Will see if i can figure that out thank you

[mk1strand]

Will this spark the car or should i go tp100

[Taz0]

It will spark the car... No need to go tp100 if you have a mp9 coil

[mk1strand]

<a href="http://s1143.photobucket.com/user/phili ... 0.jpg.html" target="_blank"><img src="http://i1143.photobucket.com/albums/n63 ... WA0030.jpg" border="0" alt=" photo IMG-20140629-WA0030.jpg"/></a>

[mk1strand]

[mk1strand]

Is that image correct?

[THANAS]

Your scale is out.






Hehe, looks correct as per what the others are recommending.

[mk1strand]

I didnt draw it the guy connecting it did

[mk1strand]

But thank you ccbb hopefully we start tonight

[THANAS]

lekker, which motor did you end up going with?

[mk1strand]

Still the 1600i just getting car to run boss complained as i worked with car and mp9 didnt work nice still getting the 1.8 20valve NA

[mk1strand]

The 20 valve should be done end of november

[mk1strand]

Ok so we got car to turn and all that but not starting or idling its started once and just died again i think its a timing problem so wil look at that tomorrow night

[Taz0]

Have you loaded a start up map?

[THANAS]

Not necessarily timing, could be fueling too. Check whether all your sensors are working correctly and then tow it to your tuner. No point fussing around yourself, there's a reason they charge for what they do, it's because they're better than you

[8Valver]

Are you reading water temperature? Also wont start otherwise..

[mk1strand]

Car starts and drives got a tuned map from friend just have a problem with my throttle body car cant idle it closes totaly tps is connected correct so no idea what it is made a temp solution to keep it open a bit wil take it to dyno tec soon and post some power figures

[Taz0]

What throttle body are you using ?
Adjust the idle screw...
If you are using mp9 throttle body then drill and tap a screw in to act as an idle adjustment screw

[mk1strand]

Its a import motor intake so i have no idea

[mk1strand]

[mk1strand]

Its an old photo so not sure what that is still same intake

[Taz0]

If its still the same throttle body then you need to make up an idle screw so that it can just keep it a crack open

[mk1strand]

How do i do that yes its the same