Mazda MPS Software +++

Johann · Post by **Johann** » Thu Nov 15, 2012 3:43 pm

Hello guys,

My friend's go a Mazda MPS, not the new one. What software will be the best for these cars and mods, DP and and all that.

I know the mps is not the best car to mod but he's keen to do dat.

Thanks guys

Mc3103 · Post by **Mc3103** » Thu Nov 15, 2012 3:45 pm

https://www.google.co.za/#hl=en&safe=of ... 80&bih=699

Dono82 · Post by **Dono82** » Thu Nov 15, 2012 3:47 pm

Is it a black mps by any chance?

Local only chip that would work is the Uni Q, or import a chip

PoLonY · Post by **PoLonY** » Thu Nov 15, 2012 3:51 pm

Nazcar tunes them

VWicked · Post by **VWicked** » Thu Nov 15, 2012 3:52 pm

I would start by buying rods first before software

Johann · Post by **Johann** » Thu Nov 15, 2012 3:59 pm

Dono82 wrote:Is it a black mps by any chance?

Local only chip that would work is the Uni Q, or import a chip

Nope Silver MPS

Balls · Post by **Balls** » Thu Nov 15, 2012 4:03 pm

What weak rods??

Johann · Post by **Johann** » Thu Nov 15, 2012 4:41 pm

VWicked wrote:I would start by buying rods first before software

Rods?

Post by **panic-mechanic** » Thu Nov 15, 2012 5:15 pm

uniq doesn't work for those. There is only one piggyback that works for them and it's not local. It also only work up to a point.
Speak to Trevor Greenehe has some really good experience with tuning the stock management on those. 083 309 5033.
Once you start making decent HP they snap rods. There is also an issue with Thrust bearings that make the crank float which causes bent rods.

MaX · Post by **MaX** » Fri Nov 16, 2012 7:34 am

PoLonY wrote:Nazcar tunes them

Go Nazkar.

I would actually suggest your friend registers on the Mazda Owners Club and ask the questions there... some sob stories about some of the supposed "Guru" Tuners...

www.mazdaownersclub.co.za

Balls · Post by **Balls** » Fri Nov 16, 2012 8:41 am

Johann wrote:
VWicked wrote:I would start by buying rods first before software
Rods?

Conrods..

The MPS bent/throw/snap rods when you put any bit of extra power into the engine..

I had a mate snap a rod on a stock MPS cruising at 60..

dazza · Post by **dazza** » Fri Nov 16, 2012 9:14 am

The MKI MPS has really weak rods but I had thought that had been resolved on the MKII MPS. None the less Trevor has mapped many of them but if I were you I would first do rods then start mapping unless you going for a very mild map

MaX · Post by **MaX** » Fri Nov 16, 2012 10:06 am

Trust me, speak to the Mazda guys first...

ruan9n · Post by **ruan9n** » Fri Nov 16, 2012 12:04 pm

MaX wrote:Trust me, speak to the Mazda guys first...

I gather they have some things to say about Trevor?

PoLonY · Post by **PoLonY** » Fri Nov 16, 2012 1:02 pm

ruan9n wrote:
MaX wrote:Trust me, speak to the Mazda guys first...
I gather they have some things to say about Trevor?

trust me, just ask the mazda guys first

MaX · Post by **MaX** » Fri Nov 16, 2012 1:22 pm

ruan9n wrote:
MaX wrote:Trust me, speak to the Mazda guys first...
I gather they have some things to say about Trevor?

Nothing about Trevor, its the 3 MPS piasini file thats in question.

Mazda MPS Software +++

Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++

Re: Mazda MPS Software +++