Thanks Panic!
Not going to waste time and $$ then, should rather just get the complete 16v setup so it works right.
Thanks again !
8v block and 16v or 20v head?
-
- Enlisted
- Posts: 22
- Registered for: 6 years 8 months
- Car Make: VW
- Car Model: Jetta 6
- mike65
- Cadet
- Posts: 115
- Registered for: 8 years 9 months
- Car Make: vw
- Car Model: mk1
- Location: south africa-port elizabeth
Re: 8v block and 16v or 20v head?
Hi guys sorry for opening this but im building a 16v head on a 8v sub
Watch this space
-
- Enlisted
- Posts: 1
- Registered for: 3 years 10 months
Re: 8v block and 16v or 20v head?
Guys please help. So I actually went through with the 16v head itb(flowed,45cc) on 8v block. 83.5mm pistons(4mm dish, no protrusion, 2.0 crank)
Struggling on what thickness to use.
Going to use high octane for detonation reasons
Using dicktator
Need guidance before I start
Will really appreciate
Struggling on what thickness to use.
Going to use high octane for detonation reasons
Using dicktator
Need guidance before I start
Will really appreciate