CTi Centre Consol Guages
-
- Cadet
- Posts: 95
- Registered for: 14 years 11 months
CTi Centre Consol Guages
Does anyone know how to connect up the wiring of the electric oil pressure guage thats in the middle consol of the CTi golfs?
The guage has 3 terminals, one +, one - and one that should go to a sender unit, but, the motor has 2. Blue one (top), white one (bottom).
Ive tried all combinations, but not getting it right. The guage definitely works, but just not in my car.
The other 2 (volt & temp) are easy. Ive done them already.
Thanks to anyone who can help.
The guage has 3 terminals, one +, one - and one that should go to a sender unit, but, the motor has 2. Blue one (top), white one (bottom).
Ive tried all combinations, but not getting it right. The guage definitely works, but just not in my car.
The other 2 (volt & temp) are easy. Ive done them already.
Thanks to anyone who can help.
-
- Colonel
- Posts: 5739
- Registered for: 17 years 3 months
- Membership No: 1041
- Location: Durban
Re: CTi Centre Consol Guages
Are you using the original vdo gauges, you must have the sender unit for it as well, which came std only on the Gti & Cti. The blue & white sender that you trying to tap off wont work.
Golf I 1800i mp9 viewtopic.php?f=11&t=50981&p=1469997#p1469997
Golf II Gti 1.8 16V mp9 viewtopic.php?f=11&t=61202&p=1820503#p1820503
Golf II Gti 1.8 16V mp9 viewtopic.php?f=11&t=61202&p=1820503#p1820503
-
- Cadet
- Posts: 95
- Registered for: 14 years 11 months
Re: CTi Centre Consol Guages
Yes,
I'm using the original VDO guages.
What does the sender unit look like? Where does it go on the engine?
I'm using the original VDO guages.
What does the sender unit look like? Where does it go on the engine?
- nick
- Lieutenant-Colonel
- Posts: 4391
- Registered for: 21 years 8 months
- Location: Cape Town
- Contact:
Re: CTi Centre Consol Guages
original VDO looks like that and should connect to the right hand side of the head.
-
- Cadet
- Posts: 95
- Registered for: 14 years 11 months
Re: CTi Centre Consol Guages
Thank you VERY much!!
I'm assuming one terminal connects to the wire that would have gone on the blue sensor that is on the top of the head, the other goes to the centre consol's guage?
I'm assuming one terminal connects to the wire that would have gone on the blue sensor that is on the top of the head, the other goes to the centre consol's guage?
- nick
- Lieutenant-Colonel
- Posts: 4391
- Registered for: 21 years 8 months
- Location: Cape Town
- Contact:
Re: CTi Centre Consol Guages
correctDCShoes wrote:Thank you VERY much!!
I'm assuming one terminal connects to the wire that would have gone on the blue sensor that is on the top of the head, the other goes to the centre consol's guage?
-
- Colonel
- Posts: 5963
- Registered for: 20 years 9 months
- Car Make: Volkswagen
- Car Model: 2010 Golf MK6 TSi
- Membership No: missing
- Location: Benoni, Gauteng
Re: CTi Centre Consol Guages
And don't mix them up, if you connect the wrong wire to the wrong pole it blows the sender, ps they are pretty priceyDCShoes wrote:Thank you VERY much!!
I'm assuming one terminal connects to the wire that would have gone on the blue sensor that is on the top of the head, the other goes to the centre consol's guage?
Champion the right to be yourself
Dare to be different and to set your own pattern
Live your own life and follow your own star.
http://en.wikifur.com/wiki/Furry
Dare to be different and to set your own pattern
Live your own life and follow your own star.
http://en.wikifur.com/wiki/Furry
-
- Cadet
- Posts: 95
- Registered for: 14 years 11 months
Re: CTi Centre Consol Guages
I'm starting to find that out, pricey and scarce.......
So, which wire goes where then?
So, which wire goes where then?
-
- Colonel
- Posts: 5963
- Registered for: 20 years 9 months
- Car Make: Volkswagen
- Car Model: 2010 Golf MK6 TSi
- Membership No: missing
- Location: Benoni, Gauteng
Re: CTi Centre Consol Guages
IIRC the one pole is marked G and the other L
L= light and G = gauge
I'll try find the details of the guy in Blairgowery I got mine from .. the single pole for a 5 bar gauge (make sure which one yours is) is around R350.00
L= light and G = gauge
I'll try find the details of the guy in Blairgowery I got mine from .. the single pole for a 5 bar gauge (make sure which one yours is) is around R350.00
Champion the right to be yourself
Dare to be different and to set your own pattern
Live your own life and follow your own star.
http://en.wikifur.com/wiki/Furry
Dare to be different and to set your own pattern
Live your own life and follow your own star.
http://en.wikifur.com/wiki/Furry
-
- Cadet
- Posts: 95
- Registered for: 14 years 11 months
Re: CTi Centre Consol Guages
Ahhh,
Thankx a MIL man, I'd appreciate that.
Mine is the 10 bar gauge. And aparently, the sender unit must be the 2 pole one.
Thanks again.
Thankx a MIL man, I'd appreciate that.
Mine is the 10 bar gauge. And aparently, the sender unit must be the 2 pole one.
Thanks again.
-
- Colonel
- Posts: 5963
- Registered for: 20 years 9 months
- Car Make: Volkswagen
- Car Model: 2010 Golf MK6 TSi
- Membership No: missing
- Location: Benoni, Gauteng
Re: CTi Centre Consol Guages
As promised
Time-Access Automotive Systems, at 011 326 4146
Time-Access Automotive Systems, at 011 326 4146
Champion the right to be yourself
Dare to be different and to set your own pattern
Live your own life and follow your own star.
http://en.wikifur.com/wiki/Furry
Dare to be different and to set your own pattern
Live your own life and follow your own star.
http://en.wikifur.com/wiki/Furry
- 4ePikanini
- Lieutenant
- Posts: 1476
- Registered for: 14 years 8 months
- Car Make: VW
- Car Model: Touareg R5
- Membership No: missing
- Location: East London, Thorn Park
- Contact:
-
- Enlisted
- Posts: 24
- Registered for: 7 years 4 months
- Car Model: '91 Golf CTi
- Location: Sandton
Re: CTi Centre Consol Guages
Hi All
Sorry to revive such an old thread but is there anyone/company that I can take my CTi to and have my oil pressure gauge fixed and my oil temp gauge changed?
My car currently has a vdo gauge for oil pressure that doesnt work and then an auto-gauge in place for the oil temp. Would like to get the correct VDO gauges and senders etc from Time Access Systems.
Sorry to revive such an old thread but is there anyone/company that I can take my CTi to and have my oil pressure gauge fixed and my oil temp gauge changed?
My car currently has a vdo gauge for oil pressure that doesnt work and then an auto-gauge in place for the oil temp. Would like to get the correct VDO gauges and senders etc from Time Access Systems.
- iLy
- Cadet
- Posts: 950
- Registered for: 16 years 11 months
- Location: Sandton
Re: CTi Centre Consol Guages
Rather find good used VDO gauges - they crop up on FB etc from time to time.
Sad to say, but the new VDO stuff is no longer Made in Germany and the quality reflects that.
Sad to say, but the new VDO stuff is no longer Made in Germany and the quality reflects that.