Golf 1400 AGY engine

Post Reply
saffer
Enlisted
Posts: 21
Registered for: 6 years 7 months

Golf 1400 AGY engine

Post by saffer »

Hi

Where is the crank timing Mark on these engines.
the fly wheel has those two tabs, and a notched V.
There are no other markings.
This getting me confused, as I think I have aligned on the wrong mark.
User avatar
panic-mechanic
Panic's Place
Posts: 26715
Registered for: 21 years 8 months
Membership No: 79
Location: Benoni, putfontein.

Re: Golf 1400 AGY engine

Post by panic-mechanic »

look on the other side. There is s mark on the cover and a cut on the crank pulley.The V notch on the flywheel side should be the right one if there is no 0 marking
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10

Perfect Power dealer. I do dyno tuning.
saffer
Enlisted
Posts: 21
Registered for: 6 years 7 months

Re: Golf 1400 AGY engine

Post by saffer »

Thanx. That was it. I did eventually see a tiny indentation, that was only visible with very strong light. Car is running like dream.
Post Reply