Velocity 1.6i cam

[Reptar]

Hi guys. I'm having a bit of a problem. I have converted my 1987 csl carburetor to MP9 fuel injection but the cams that I have catches on the head. Any ideas on which cam I can use. I have a G-cam and a 276 but both of them catches on the head. The head that i have is from a Velocity 1.6i

[chucker02]

Where does it catch the head?

[dubz-on-drugz]

Use a grinder and shave the head a bit and allow for clearance..just block all shaving from falling inside the head

Sent from my SM-G920F using Tapatalk

[Reptar]

The lobes are too long. They are pushing against the head before they reach the lifters

[chucker02]

Thats weird that even a g cam would do that. Only from 288 if I remember correctly does it start tondo that

[panic-mechanic]

yes just clearance the bucket

[Reptar]

Is there no other way except grinding the head?

[panic-mechanic]

Yup put a head on where they don't catch.

[dubz-on-drugz]

A g cam to a 272 should fit with no changes needed to done to the head ....

Sent from my SM-G920F using Tapatalk

[Nay]

Good Day People


I have a 2006 VW 1.4 Velocity Golf, the Rear Main Seal needs to be replaced,
can some please tell me what is the part number for it?

[Reptar]

Thanks for all the advice guys. I will try to grind the head a bit