Page 1 of 1

Clutch Bracket at Firewall

Posted: Thu Nov 27, 2014 8:23 am
by Juano
I've serviced my clutch and pressure plate about 4 years ago on my 2003 cit golf, and recently the bracket that's attached to the firewall started pulling away from the firewall. I've been trying to weld it back but its in such a award place :crazy: so it makes it difficult to weld it properly back, any suggestions???

Re: Clutch Bracket at Firewall

Posted: Thu Nov 27, 2014 8:47 am
by Donavan
Goldwagen sells a plate that fits onto the firewall.

Re: Clutch Bracket at Firewall

Posted: Thu Nov 27, 2014 8:47 am
by Naku786
buy the firewall bracket plate from GW

Image

Re: Clutch Bracket at Firewall

Posted: Thu Nov 27, 2014 9:06 am
by Juano
Unfortunately my car doesn't work with a plate I've seen the plate at goldwaggen, my car has a T structured bracket there and theres no plate around it,I've seen the velocitys and newer golfs are the same... :yawn:

Re: Clutch Bracket at Firewall

Posted: Thu Nov 27, 2014 9:34 am
by Naku786
You have this then

Image[/URL][/img]

You can swap over to the old style system, remove the bracket (2 no. 10 nuts) & remove the saddlebag locking pin. Then you need to remove the arm from the pedal... I just removed the clutch pedal assembly & took it out.

Get the "long" clutch cable, hook onto pedal, fit bracket & reassemble & bobs your aunties uncle...

Just note the pedal feel will be a little harder with the long cable.

Re: Clutch Bracket at Firewall

Posted: Thu Nov 27, 2014 2:44 pm
by Juano
Geez you a genius bud!!! I was thinking of doing that!! will do it this weekend! thanks man!!!!