XMS4 Injector Wiring
Posted: Wed Feb 15, 2012 10:11 am
Need to know how to wire the injectors (batched) (XMS4B-4A) on a ABF 16v (1+4) (2+3) as in the PP manual or do I wire it according to the firing order (1 3 4 2) with (1+3) (2+4) together.
Did a lot of setting changes (AMP / TPS / RPM / IGN ref / ENGT calibrationsions) in the software as supplied as start up maps.
I'm seeing RPM / TPS / in software moving when trying to start and opening the throttle.
Have a lot of back firing at the moment,Injectors are spraying (1+4) (2+3) there's spark at the plugs using a Huco wasted spark coil as in the pics with the internal ignitors removed.
Did a lot of setting changes (AMP / TPS / RPM / IGN ref / ENGT calibrationsions) in the software as supplied as start up maps.
I'm seeing RPM / TPS / in software moving when trying to start and opening the throttle.
Have a lot of back firing at the moment,Injectors are spraying (1+4) (2+3) there's spark at the plugs using a Huco wasted spark coil as in the pics with the internal ignitors removed.