Info needed on scirocco dsg

Post Reply
User avatar
RoSsIkId
Wheel Whore
Posts: 4
Registered for: 5 years 7 months
Membership No: 3248

Info needed on scirocco dsg

Post by RoSsIkId »

Good day gents

Its been a week since I took delivery of my Scirocco and I fall more inlove with it everytime she greets me.

Need some help on a few things. I have seen now she is around a stage 1+ range. Downpipe with 76mm exhaust up to the standard backbox for some 007 mods, full induction and software. Dyno last night on syndicate dyno 164wkw 376nm. I am happy with the power as the dsg puts it down extremely well. Previous car was a Focus ST prefacelift with 211wkw 518nm.

Is there a possibility to see what file is loaded? And the fogs on the car blew a fuse. Wires touched. Fuses replaced and globes but fogs still wont come on and mech said i need to reset the canbus B module. I am in Benoni.

Thank you
Howie-WP
VWCSA Member
Posts: 14200
Registered for: 21 years 7 months
Membership No: 2033
Location: Cape Town, SA

Re: Info needed on scirocco dsg

Post by Howie-WP »

re: Software, previous owner?
User avatar
panic-mechanic
Panic's Place
Posts: 26715
Registered for: 21 years 7 months
Membership No: 79
Location: Benoni, putfontein.

Re: Info needed on scirocco dsg

Post by panic-mechanic »

yes you can't see what software is loaded. Can only ask the previous owner.
I can assist on a weekend to reset the fault if that is the issue - might not be the only problem.
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10

Perfect Power dealer. I do dyno tuning.
User avatar
RoSsIkId
Wheel Whore
Posts: 4
Registered for: 5 years 7 months
Membership No: 3248

Re: Info needed on scirocco dsg

Post by RoSsIkId »

Thank you panic. Will get in touch
Post Reply