Tfsi cam golf5 bwa

Post Reply
vwpro
Captain
Posts: 2723
Joined: Tue Nov 27, 2007 8:38 pm
Car Make: Audi Quatro, polo Beast and A3
Car Model: S3, Polo Playa,
Membership No: missing
Location: Klerksdorp

Tfsi cam golf5 bwa

Post by vwpro » Thu Jan 25, 2018 7:58 am

Anyone by change got a golf5 bwa motor camshaft in good co dition that you can measure the lift on the lobes for the hpfp.
:troll:
User avatar
panic-mechanic
Panic's Place
Posts: 24756
Joined: Mon Jul 29, 2002 9:08 am
Membership No: 79
Location: Benoni, putfontein.

Re: Tfsi cam golf5 bwa

Post by panic-mechanic » Thu Jan 25, 2018 8:01 am

From where to where do You want the measurement cause it's a triangle

Image
Stephan van Tonder - Jhb - Putfontein Benoni
'07 Audi S6 V10 - beast !!!!!
'05 Audi A6 3.0L TDI Avant
'07 Audi A4 2l TDI
'95 Audi 90 coupe quattro
'13 VW CC 2l tdi (repair project)
'05 Touareg v10

Perfect Power dealer. I do dyno tuning.
User avatar
Dale
Lieutenant
Posts: 1038
Joined: Mon Jul 29, 2002 9:04 am
Location: Gauteng
Contact:

Re: Tfsi cam golf5 bwa

Post by Dale » Thu Jan 25, 2018 8:59 am

panic-mechanic wrote:From where to where do You want the measurement cause it's a triangle

Image

Thanks Stefan, was wondering about this the other day. The shaft on the right, that lobe replaceable on it own?
vwpro
Captain
Posts: 2723
Joined: Tue Nov 27, 2007 8:38 pm
Car Make: Audi Quatro, polo Beast and A3
Car Model: S3, Polo Playa,
Membership No: missing
Location: Klerksdorp

Re: Tfsi cam golf5 bwa

Post by vwpro » Thu Jan 25, 2018 9:48 am

From the senter to flat part of the flat lobe edge then from senter to top of lobe subtract the 2 measurements and you will have the lift
Last edited by vwpro on Fri Jan 26, 2018 6:35 am, edited 1 time in total.
:troll:
User avatar
panic-mechanic
Panic's Place
Posts: 24756
Joined: Mon Jul 29, 2002 9:08 am
Membership No: 79
Location: Benoni, putfontein.

Re: Tfsi cam golf5 bwa

Post by panic-mechanic » Thu Jan 25, 2018 3:29 pm

They probably are if you can find a replacement but I don't know if VW sells something like that.
Maybe somebody aftermarket? I have never searched or tried.
I went to go measure a cam for you but forgot that blueblob took it to have something tested.
I'll ask him to take some measurements.
But If you say you changed the cam then I doubt it's that.
Stephan van Tonder - Jhb - Putfontein Benoni
'07 Audi S6 V10 - beast !!!!!
'05 Audi A6 3.0L TDI Avant
'07 Audi A4 2l TDI
'95 Audi 90 coupe quattro
'13 VW CC 2l tdi (repair project)
'05 Touareg v10

Perfect Power dealer. I do dyno tuning.
vwpro
Captain
Posts: 2723
Joined: Tue Nov 27, 2007 8:38 pm
Car Make: Audi Quatro, polo Beast and A3
Car Model: S3, Polo Playa,
Membership No: missing
Location: Klerksdorp

Re: Tfsi cam golf5 bwa

Post by vwpro » Thu Jan 25, 2018 9:15 pm

There are some audi's that runs on 90bar fp, it might be that vw stealership made a fuckup and supplied me with the wrong cam.
The 4 lobe tsi cams have a 3.5mm lift. I found a kit to mod the VAG TFSi Cam Follower To TSi Cam Follower Roller ...
:troll:
vwpro
Captain
Posts: 2723
Joined: Tue Nov 27, 2007 8:38 pm
Car Make: Audi Quatro, polo Beast and A3
Car Model: S3, Polo Playa,
Membership No: missing
Location: Klerksdorp

Re: Tfsi cam golf5 bwa

Post by vwpro » Fri Jan 26, 2018 8:11 pm

Found the problem,
When pushed the fuel supply pipe onto the s/s pipe connected to the hpfp a peace of rubber sheer off and kind of blocked the fuel supply to the hpfp, cleaned out pipes and it ran like mouse with slippers, now I can fine tune the file to xxxbar boost and see what we get out on the wheels, last power run gave us plenty wkw on 1.9bar boost, plan to take it higher.
:troll:
User avatar
Dale
Lieutenant
Posts: 1038
Joined: Mon Jul 29, 2002 9:04 am
Location: Gauteng
Contact:

Re: Tfsi cam golf5 bwa

Post by Dale » Mon Jan 29, 2018 9:29 am

vwpro wrote:Found the problem,
When pushed the fuel supply pipe onto the s/s pipe connected to the hpfp a peace of rubber sheer off and kind of blocked the fuel supply to the hpfp, cleaned out pipes and it ran like mouse with slippers, now I can fine tune the file to xxxbar boost and see what we get out on the wheels, last power run gave us plenty wkw on 1.9bar boost, plan to take it higher.
Have you ever... glad you managed to fix it. Agents would have replaced alot of stuff I recon.
Post Reply