Hi good day guys I'm new here
I would like to know what can it be my polo 1. 4 2007 BLM car is over heating I saw the water coming out by one of the head bolts would like to knw if the head isn't cracked or something.
TIA
Polo 1.4 2007 BLM overheat
-
- Enlisted
- Posts: 28
- Registered for: 4 years 9 months
- Car Make: VW
- Car Model: Polo 1.2 TSI
-
- Lieutenant
- Posts: 1621
- Registered for: 7 years 1 month
- Car Make: VW
- Car Model: Polo 9n 1.9 TDI Sportline
- Location: Durban
Re: Polo 1.4 2007 BLM overheat
Well the only way u would know if the head is cracked is by removing it and sending it in for pressure testing.
Is it leaking inbetween the head and block (at the gasket)?
Sent from my EML-L29 using Tapatalk
Is it leaking inbetween the head and block (at the gasket)?
Sent from my EML-L29 using Tapatalk
When a car tailgates me, i slow down - then floor it and give them a cloud of diesel smoke to choke on
-
- Enlisted
- Posts: 28
- Registered for: 4 years 9 months
- Car Make: VW
- Car Model: Polo 1.2 TSI
- panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 7 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: Polo 1.4 2007 BLM overheat
Water coming out of a head bolt does not sound promising at all. My guess is strip and get it pressure tested.
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.