Hi Guys,
I'm from Midrand, and I need to solve a starting problem with my 1.4 polo vivo.
In the morning or on standing for a few hours, it seems to only start after a few swings.
Once the engine is warm it starts on the first swing. I tried pressing the accelerator a few times , then it starts on the second swing.
I don't know if it is the cold start sensor ? I used the software to scan the electronics , but it didn't give much info.
I hope I can get some positive advice.
Thanks Guys,
From a new member,
Logan Naidoo
New Member - Need advice on polo vivo
-
- Enlisted
- Posts: 3
- Registered for: 5 years 6 months
- panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 8 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: New Member - Need advice on polo vivo
Not enough info but yes. Water temp sender reading wrong can cause that.
It won't always show as anfault on a scan - you also have to look at the actual valve it is reporting.
It won't always show as anfault on a scan - you also have to look at the actual valve it is reporting.
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.