Hi guys, need a bit of help and info please.
I have a 4 speed T3 microbus with a Ford 3L V6 engine, which is just too thirsty for my pocket.
I want to fit a 2L 8V ADY or AGG engine with a Perfect power management system.
Looking for any tips on what to do and what not to do as I will be doing the installations myself,
and also what kind of fuel consumption I can expect on the open road as I want to use it for long trips.
I know it is cheaper and easier to learn from people who have done this before, so I'm looking forward
to your input.
Golf engine in microbus
- panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 8 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: Golf engine in microbus
Speak to this guy - Stuart sterling. He has done a ton of them and can tell you where to get the bits and what you need.
http://www.syncrohospital.co.za/index.p ... specialist
also try these okes for the right bellhousing and engine mounts - they used to make a kit that you basically bolt in.
https://www.giloeng.com/
http://www.syncrohospital.co.za/index.p ... specialist
also try these okes for the right bellhousing and engine mounts - they used to make a kit that you basically bolt in.
https://www.giloeng.com/
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.