Good day gentle man
I need help I just installed a VW AGG engine and a Gotech MFI X and connected it with Mode 0.
I have the round coil connected it this way
Pin11 of 16 on the Nagetive
Pin 15 of 16 on the positive
The micro fueller pin 14 I didn't connect.
I can't get any spark can anyone help and share some info on what's wrong and why I can't find any spack.
Gotech MFI X no spark
-
Dontsi
- Enlisted
- Posts: 2
- Registered for: 5 years 8 months
- Car Make: Vw Golf
- Car Model: Mk2 GTi
-
panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 8 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: Gotech MFI X no spark
The pin 15 of 16 is not meant for driving a coil. That should be a switched ignition source from the car or battery via a relay.
Do you see rpm in the software when you crank it?
Do you see rpm in the software when you crank it?
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
-
Dontsi
- Enlisted
- Posts: 2
- Registered for: 5 years 8 months
- Car Make: Vw Golf
- Car Model: Mk2 GTi
Re: Gotech MFI X no spark
Sorry to replying this late.
Yes I do see the spark. But still the car wouldn't start.
I even converted it to carburetor the car starts but now it has now power it idles very nice but when you rev it doesn't sound good it has br bra bra sound and doesn't pull that well
Yes I do see the spark. But still the car wouldn't start.
I even converted it to carburetor the car starts but now it has now power it idles very nice but when you rev it doesn't sound good it has br bra bra sound and doesn't pull that well