Mk3 golf water temp sensor.

Post Reply
theunis.visser
Cadet
Posts: 138
Registered for: 6 years 4 months
Car Make: Volkswagen
Car Model: Mk5 Golf GTI

Mk3 golf water temp sensor.

Post by theunis.visser »

In the middle of the 1.8 mp9 engine block is a flange with (what I'm told) is a water temp sensor and if it is faulty, causes erratic idling and high fuel consumption.

Can this sensor be tested? As on cold start my 1.8 idles like it has a 276 cam In!

In the red circle on the attached photo.Image

Sent from my SM-G925F using Tapatalk
User avatar
panic-mechanic
Panic's Place
Posts: 26715
Registered for: 21 years 8 months
Membership No: 79
Location: Benoni, putfontein.

Re: Mk3 golf water temp sensor.

Post by panic-mechanic »

the picture is not MP9 but yes that is where the water temp sender is situated.
you can test it with vcds if you look at the reading blocks to see if it is reasonable
oterwise swop it and see if it makes a difference
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10

Perfect Power dealer. I do dyno tuning.
Post Reply