Good afternoon
Can anyone recommend someone to do valve guides on my 8v head.
Started this morning with a noise - opened up motor and pieces of valve guide on no1 piston.
Valves still seating , have no idea what happened .
Busy building the KR so dont want to spend a fortune.
Thanks
AC
Valve guides 8v head
- PapaJo
- Brigadier
- Posts: 6990
- Registered for: 14 years
- Car Make: VW's
- Car Model: '16 7R, '86 Caddy AUM 20VT
- Membership No: missing
- Location: Meyerton or Offshore Guyana.
Re: Valve guides 8v head
Oh no!!!DeanK wrote:Good afternoon
Can anyone recommend someone to do valve guides on my 8v head.
Started this morning with a noise - opened up motor and pieces of valve guide on no1 piston.
Valves still seating , have no idea what happened .
Busy building the KR so dont want to spend a fortune.
Thanks
AC
DIY it. Get a set of guides and valve stem seals, buy a reaming tool the right size for the valve stem. Strip the head and pull the old guides out, insert new guides and ream, fit new valve stem seals after you have lapped in the valves. Assemble head and put back on motor. Put rest of stuff on head. Set and check timing marks. Turn motor over by hand to ensure all is well and set correctly. Start and enjoy again.
Do I make it sound easy or not?
- panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 8 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: Valve guides 8v head
East rand automotive engineering. 0118235882
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
-
- Cadet
- Posts: 194
- Registered for: 7 years 6 months
- Location: Alberton
Re: Valve guides 8v head
Thank s - booked in this morning at 8 am
- PapaJo
- Brigadier
- Posts: 6990
- Registered for: 14 years
- Car Make: VW's
- Car Model: '16 7R, '86 Caddy AUM 20VT
- Membership No: missing
- Location: Meyerton or Offshore Guyana.
Re: Valve guides 8v head
Do the 300 thing while you are at it. Do it!!!DeanK wrote:Thank s - booked in this morning at 8 am
-
- Cadet
- Posts: 194
- Registered for: 7 years 6 months
- Location: Alberton
Re: Valve guides 8v head
Spending money on a 8v that is a temp motor is so wrong .....
Yes , this will be my last fiddle with 8v - cam , degree pulley etc etc will go on / in .
At least I can sell a perfect motor when we swap the units.
Yes , this will be my last fiddle with 8v - cam , degree pulley etc etc will go on / in .
At least I can sell a perfect motor when we swap the units.
- PapaJo
- Brigadier
- Posts: 6990
- Registered for: 14 years
- Car Make: VW's
- Car Model: '16 7R, '86 Caddy AUM 20VT
- Membership No: missing
- Location: Meyerton or Offshore Guyana.
Re: Valve guides 8v head
DeanK wrote:Spending money on a 8v that is a temp motor is so wrong .....
Yes , this will be my last fiddle with 8v - cam , degree pulley etc etc will go on / in .
At least I can sell a perfect motor when we swap the units.
I hear you. Never say never.