How to remove lift pump MK2 CSi

Post Reply
175SBU
Cadet
Posts: 528
Registered for: 8 years 6 months
Car Model: MK1 1.4i, MK2 CSi
Location: Johannesburg

How to remove lift pump MK2 CSi

Post by 175SBU »

Car: MKII Fuel Injection CSi

Remove carpet to expose the circular cover.
Image

Remove the 3 screws that secure the circular cover.
Image

Undo the clamps that connects your fuel lines, remove the power connector and undo the moer se groot se union nut(white one)

Image
Image

Remember to clean the dirt around the union nut before removing the sender unit.
Image

Now remove the unit by pulling gently and massaging side to side

Image

The silver part is your lift pump.

Undo the clamp that connects the breather valve and the power connector as well.
Image

The filter and the filter adapter.
Image
Image

New pump.
Image

Comes with new filter
Image

Reassembly is the reverse.

Image

Image

The tricky part is getting this union nut sit proper, just be patient.
Image






Sent from my iPhone using Tapatalk
Post Reply