Page 1 of 1

ABF torque setting

Posted: Wed May 13, 2015 7:35 am
by Pankop
Can anybody assist me with the torque settings from top to bottom for an ABF motor.

Head studs are ARP and conrods also

Thanx in advance

Re: ABF torque setting

Posted: Wed May 13, 2015 7:54 am
by Donavan
ARP settings is different from standard strecth bolts iirc.

Std settings...
Head - tighten 40nm and then torque to 60nm + 90deg turn
Conrods - 25nm
Crankshaft Bolts - 65nm

Re: ABF torque setting

Posted: Wed May 13, 2015 8:00 am
by grego
Pankop wrote:Can anybody assist me with the torque settings from top to bottom for an ABF motor.

Head studs are ARP and conrods also

Thanx in advance
ARP head studs get torqued to 110Nm in 3 stages

Re: ABF torque setting

Posted: Wed May 13, 2015 8:10 am
by chrisg4
Image

Re: ABF torque setting

Posted: Wed May 13, 2015 8:23 am
by Pankop
Thanx a lot guys. chrisg4 can you email me that tech data please.... willemkruger1980@hotmail.com

Re: ABF torque setting

Posted: Wed May 13, 2015 8:36 am
by 4ePikanini
do the first stage torque 5 times to make absolutely sure the head is seated.

do the second stage 3 times to double check.


Then do the final degree TTY torque.