Page 1 of 3
Mp9 coil dicktator and distributor setup connection
Posted: Sun Jun 29, 2014 7:16 pm
by mk1strand
Hi guys
All the wiring is done just want to know the last thing how do you setup the dicktator without the TP100 module
I read something that you connect the coil and distributor can someone just give clarity on that please and thank you.
its a dicktator standard
Re: Mp9 coil dicktator and distributor setup connection
Posted: Sun Jun 29, 2014 8:50 pm
by Taz0
On the mp9 coil
Ground to ground
Positive to ignition
Green / thin wire to dictator trigger out wire
On distributor
Ground to ground
Positive to tps 5v positive
Trigger to dictator trigger in signal wire
Re: Mp9 coil dicktator and distributor setup connection
Posted: Sun Jun 29, 2014 10:14 pm
by mk1strand
Will see if i can figure that out thank you
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 7:34 am
by mk1strand
Will this spark the car or should i go tp100
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 7:58 am
by Taz0
It will spark the car... No need to go tp100 if you have a mp9 coil
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:12 am
by mk1strand
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:13 am
by mk1strand
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:14 am
by mk1strand
Is that image correct?
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:27 am
by THANAS
Your scale is out.
Hehe, looks correct as per what the others are recommending.
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:33 am
by mk1strand
I didnt draw it the guy connecting it did
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:33 am
by mk1strand
But thank you ccbb hopefully we start tonight
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:51 am
by THANAS
lekker, which motor did you end up going with?
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:55 am
by mk1strand
Still the 1600i just getting car to run boss complained as i worked with car and mp9 didnt work nice still getting the 1.8 20valve NA
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:58 am
by mk1strand
The 20 valve should be done end of november
Re: Mp9 coil dicktator and distributor setup connection
Posted: Mon Jun 30, 2014 11:37 pm
by mk1strand
Ok so we got car to turn and all that but not starting or idling its started once and just died again i think its a timing problem so wil look at that tomorrow night
Re: Mp9 coil dicktator and distributor setup connection
Posted: Tue Jul 01, 2014 5:16 am
by Taz0
Have you loaded a start up map?
Re: Mp9 coil dicktator and distributor setup connection
Posted: Tue Jul 01, 2014 6:45 am
by THANAS
Not necessarily timing, could be fueling too. Check whether all your sensors are working correctly and then tow it to your tuner. No point fussing around yourself, there's a reason they charge for what they do, it's because they're better than you
Re: Mp9 coil dicktator and distributor setup connection
Posted: Tue Jul 01, 2014 9:49 am
by 8Valver
Are you reading water temperature? Also wont start otherwise..
Re: Mp9 coil dicktator and distributor setup connection
Posted: Tue Jul 01, 2014 10:36 pm
by mk1strand
Car starts and drives got a tuned map from friend just have a problem with my throttle body car cant idle it closes totaly tps is connected correct so no idea what it is made a temp solution to keep it open a bit wil take it to dyno tec soon and post some power figures
Re: Mp9 coil dicktator and distributor setup connection
Posted: Tue Jul 01, 2014 10:50 pm
by Taz0
What throttle body are you using ?
Adjust the idle screw...
If you are using mp9 throttle body then drill and tap a screw in to act as an idle adjustment screw
Re: Mp9 coil dicktator and distributor setup connection
Posted: Tue Jul 01, 2014 10:51 pm
by mk1strand
Its a import motor intake so i have no idea
Re: Mp9 coil dicktator and distributor setup connection
Posted: Tue Jul 01, 2014 10:55 pm
by mk1strand
Re: Mp9 coil dicktator and distributor setup connection
Posted: Tue Jul 01, 2014 10:56 pm
by mk1strand
Its an old photo so not sure what that is still same intake
Re: Mp9 coil dicktator and distributor setup connection
Posted: Wed Jul 02, 2014 2:50 am
by Taz0
If its still the same throttle body then you need to make up an idle screw so that it can just keep it a crack open
Re: Mp9 coil dicktator and distributor setup connection
Posted: Wed Jul 02, 2014 7:04 am
by mk1strand
How do i do that yes its the same