Polo vivi head gasket kit

Replacement parts suitable for: VW ~ Audi ~ Seat ~ Opel ~ BMW ~ Mini ~ Mercedes Benz
Post Reply
Imotions
Cadet
Posts: 484
Registered for: 11 years 1 month
Car Make: VW
Car Model: MK2 CSL
Location: Florida

Polo vivi head gasket kit

Post by Imotions »

hi guys
please can i get a price on a polo vivo 1.4 head gasket kit

Sent from my SM-G920F using Tapatalk
User avatar
Unobeat
Lieutenant-General
Posts: 8378
Registered for: 12 years 11 months
Car Make: Fiat, Toyota, Mazda
Car Model: Uno, Auris, CX-5
Location: Pretoria

Re: Polo vivi head gasket kit

Post by Unobeat »

There is no kit readily available off the shelf.

The steps below is if you will be doing the work yourself:
1. Head needs to stripped off(but first coolant & oil needs to be drained)
2. Take head to engineers for a recon and pressure tested
3. New HD, service kit(filters, oil + plugs- timing belt and tensioner depending on condition) and head bolts purchase from spares shop
4. Check condition of Thermostat and Water pump(replace if old)
5. Fetch head from engineers
6. Start assembly of everything
7. Have your torque settings and torque wrench
8. Service the motor and do a radiator flush
9. make sure timing on the spot by turning the motor twice and start the car while keeping the radiator cap open
THANAS wrote:Mix them together to create Shellstrol, and then mix that with Winstrol to create the ultimate, maximum performance oil for your engine.
panic-mechanic wrote:When I build engines and do stuff like this I do it when there is nobody else around, No distractions, No phone nothing so that you don't forget what you should be doing. It's the little things that make them run right. Anybody can slap a basic bottom end together. that is the easy bit. It's all the little things that makes these builds a success or not.
Post Reply