Thx for that info. I have also experienced my clay bar braking up. Thought it was because of age.xion wrote:The trick is to use a big enough piece so you get a good grip , also keep it well lubed and work small areas at a time.
Car wash and water causes the clay to break up prematurely.
Chem guys luber or autoglym rapid detailer works a treat
Clay Bars/Lubriants...
Forum rules
Please take a look at the rules for posting in the Technical section as all posts will be moderated accordingly...
Technical Section Rules
Please take a look at the rules for posting in the Technical section as all posts will be moderated accordingly...
Technical Section Rules
- Coroner
- Major
- Posts: 3120
- Registered for: 15 years 2 months
- Car Make: VW / Subaru
- Car Model: Citi 1600 / 2.0 T
- Membership No: 1502
- Location: Pretoria
Re: Clay Bars/Lubriants...
Speed is money......how fast do you want to go?
- LYFGP0
- Major
- Posts: 3907
- Registered for: 15 years 10 months
- Car Make: BMW
- Car Model: 320D MSport
- Membership No: missing
Re: Clay Bars/Lubriants...
Thread revival
Think i need to try this the weekend.
Think i need to try this the weekend.
Current: '10 BMW E90 320D LCI MSport Auto - Alpine White
Ex: '96 Jetta 3 CSL - White (SOLD)
Ex: '05 Velocity 1.6i SOLD
Ex: 1.9 TDI Suety PD - TUNING (SOLD)
Ex: 1.8i Playa LYF ___ GP (SOLD)
Ex: Mazda Midge 323 160i (Sold)
LYGP 1.8i
Ex: '96 Jetta 3 CSL - White (SOLD)
Ex: '05 Velocity 1.6i SOLD
Ex: 1.9 TDI Suety PD - TUNING (SOLD)
Ex: 1.8i Playa LYF ___ GP (SOLD)
Ex: Mazda Midge 323 160i (Sold)
LYGP 1.8i
boost'd wrote:"big rims are like high heels, they not comfortable to wear but they do look good"
-
- Lord of the Sponge
- Posts: 10704
- Registered for: 13 years 8 months
- Car Make: VW
- Car Model: Sea Blue Polo Vivo
- Membership No: 1676
- Location: Durban
Re: Clay Bars/Lubriants...
The general rule is, if you are planning on claying your car, you should be planning on at least 1 polishing step thereafter to remove any potential marring from the claying process, even if it is only a light polish with an AIO.
Obviously the harder your paint and the less aggressive the clay bar, the less likely you will see marring, but there is no method to completely guard against it. On darker cars and cars with softer paint, clay marring is always a real possibility.
As for lube, dedicated clay lubes will work better at preventing the clay from breaking down during use - I tend to use ONR instead as it works equally as well and is a fraction of the price.
And to solve the problem of clay sticking to your hands when claying, simply wear a pair of nitrile gloves.
A few helpful articles
http://www.autogeekonline.net/forum/how ... -clay.html
http://www.autogeekonline.net/forum/hot ... paint.html
http://www.autogeekonline.net/forum/ask ... paint.html
http://www.autogeekonline.net/forum/hot ... y-car.html
Obviously the harder your paint and the less aggressive the clay bar, the less likely you will see marring, but there is no method to completely guard against it. On darker cars and cars with softer paint, clay marring is always a real possibility.
As for lube, dedicated clay lubes will work better at preventing the clay from breaking down during use - I tend to use ONR instead as it works equally as well and is a fraction of the price.
And to solve the problem of clay sticking to your hands when claying, simply wear a pair of nitrile gloves.
A few helpful articles
http://www.autogeekonline.net/forum/how ... -clay.html
http://www.autogeekonline.net/forum/hot ... paint.html
http://www.autogeekonline.net/forum/ask ... paint.html
http://www.autogeekonline.net/forum/hot ... y-car.html