.: Polo TDI Sportline Turbo Upgrade and FMI Install :.

Forum for questions that are asked on a frequent basis...
Forum rules
Please take a look at the rules for posting on the VWCSA Forum as all posts will be moderated accordingly...

VWCSA Forum Posting Rules and Guidelines
User avatar
EedubzShmeedubz
Colonel
Posts: 5168
Registered for: 17 years 8 months
Membership No: 1056
Location: The Study

.: Polo TDI Sportline Turbo Upgrade and FMI Install :.

Post by EedubzShmeedubz »

So Friday saw Chicken Licken arrive back in SA for a little surpirse visit from Denmark. One of his priorities was to get some work done to his car while here, so the work began...

The parts were collected (thanx Tashen :wink: ) on Friday shortly after Chicken's arrival, and were promptly laid out an admired. Chicken sat in his car for 3 hours making "vroom vroom psshhhhh" sounds with the turbo on his lap :lol:

The turbo in question was a Garrett VNT1749VB - PD150 from the SEAT Cupra TDI. This would replace the OEM Garrett VNT1749V

The Parts
Image

The Garrett VNT1749VB
Image

So at about 9am on Saturday we met G60 at Zabka to do the install.
On a side note, Chicken had decided that the night of his arrival would be a good time to indulge, so the morning was abit rough for him, with many grunts and groans emminating from him.

After a short chat we started with the work and got the car jacked up on the lift.
Image

G60's tools for the job
Image

Morne quickly got to work and removed the TDI engine cover. I was surpirsed that it simply pulled off, I thought a few screws would need to be loosened, but that was not the case.
Image
Image

One of the first things to be removed was the airbox and the piped on the intake pipe to the turbo
Image

The intake manifold was then removed
Image
Image

Roadhawg and G60 having a chat. Its amazing how much k@k guys can talk when they spend a day together working on cars. If the walls of that workshop could talk :wink: :shock: :?
Image

The old turbo. The oil on the exhaust manifold is lube to loosen up the bolts
Image

Some of the parts removed so far
Image

Cool old tractor outside
Image

Cool new tractor outside :wink:
Image

One of many smoke breaks. I didnt feel left out tho 8)
Image

We needed a few odds and ends, and this is where we found them!!! :twisted:
Image
Image

The old turbo being removed
Image

The two turbos side by side. The new VB on the left, old V on the right
Image

New VB on right, old V on left
Image

G60 grining something
Image

New turbo in place :D
Image

My, how time flies...
Image
Image
Image

Did you know, if u drop the bolt that holds the intake pipe in place you have to remove the battery and basically climb into the engine bay to retrieve it :P
Image

The new intercooler
Image

The front bumper comes off
Image

The really tiny OE intercooler tucked away on the driver's side of the car
Image

Chicken was obsessed with cleaning everything as it was exposed :roll:
Image

The new FMI (Front Mount Intercooler) mock fitted to see what goes where and how we would run the boost piping
Image

Some piping being fabricated
Image

Next the front valance had to be removed to mount the FMI
Image

Holes were drilled for the FMI mounts...
Image

...and the mounts were attached
Image

The FMI in place
Image

A small section of the front valance had to be cut away to accomodate the FMI
Image
Image
Image

Front valence goin back on
Image
Image

The "watcher"
Image

It was bit of a mission figuring out how to route the boost piping, but we eventually figured it out. Basically the charge comes from the turbo, into the new FMI, then into the smaller OE cooler, and then up top to the intake manifold
Image
Image
Image

Front bumper back on
Image
Image

The finished product :twisted:
Image

A very happy Chicken Licken :D
Image

The end of a very fullfilling day 8)
Image

At the moment the new turbo is still boosting at the same levels as the OE turbo. The car will recieve an FRC remap in the next week or so, and after that it will be boosting much higher and will be able to take full potential of the new setup 8)

I had a great day and I think so did G60, Roadhawg and Chicken. I learnt alot from G60, and really enjoyed talking about the technical aspects of cars. I also loved the ride in this car afterwards, Roadhawg will agree with me that its an amazing beast of a car :twisted:
RoadHaWg
VWCSA Member
Posts: 17470
Registered for: 20 years
Membership No: 731
Location: Joburg

Post by RoadHaWg »

Hehe!!

Nice one man.

Yeah Had fun today guys. Nice seeing the inside of a TDi, and the info that G60 gave me that didnt go over my head I am very grateful for!!

But Eedubz....U forgot a couple steps there man....I think they went: Bumper on.....Bumper off.....Bumper on.....Bumper off.....Bumper on....etc!!!


I'll be happy to get in ur way again anytime guys!!
Stuart
2006 Jeep Wrangler "Sarge"
1966 Splitty.
2014 KTM 1190 Adventure
No Mk1 ;(
"We've all been raised on television to believe that one day we'd all be millionaires, and movie gods, and rock stars. But we won't. And we're slowly learning that fact. So we build VDubs son..."

"Owning a MK1 varies between having sex to getting hit in the balls. Usually several times in one day."
MK2 G60
Lieutenant-Colonel
Posts: 4007
Registered for: 17 years 8 months
Car Make: vw
Membership No: 388
Location: canada

Post by MK2 G60 »

Guys shot for letting me do this.
I wanted to see how this all came together and how it looked.
im impressed with the turbo.Iwish vw would do this to all there 1.9 will last longer.

Don't mention front bumper. :twisted:

Eedubz shot for all the photos and help.
Rdhawg and chicken shot to u guys too.

Whats next?
G60 16V GOLF

WHAT WE LEAVE BEHIND IS NOT AS IMPORTANT AS HOW WE LIVED.

IT IS NOT UNSAFE IT IS OLD SCHOOL!!!!!!!!!

ALDO IS THE MAN WITH A GUN.
THATS HOW WE ROLL [SAINT-J]
GTS KNOWS HOW TO MAKE A STICKER.
User avatar
MeTsU
Lieutenant-Colonel
Posts: 4140
Registered for: 17 years 6 months
Car Make: Volkswagen
Car Model: 2005 Polo 1.9 TDi Sportline
Membership No: 1644
Location: Port Elizabeth

Post by MeTsU »

Hey Chicken,

Glad to see that your mod finally became a reality. ;) See, I kept my word. ;)
2005 Polo 1.9TDi Sportline - Sooty
Image
RoadHaWg
VWCSA Member
Posts: 17470
Registered for: 20 years
Membership No: 731
Location: Joburg

Post by RoadHaWg »

g60 golf wrote:Guys shot for letting me do this.
I wanted to see how this all came together and how it looked.
im impressed with the turbo.Iwish vw would do this to all there 1.9 will last longer.

Don't mention front bumper. :twisted:

Eedubz shot for all the photos and help.
Rdhawg and chicken shot to u guys too.

Whats next?
Whats next u say.....

Think that cooler will fit behind one of these bumpers?
Image
8) :lol:

Man today was an eye opener. Thanks again.

And chicken.....cant wait to see what she does when she's got some software!!
Stuart
2006 Jeep Wrangler "Sarge"
1966 Splitty.
2014 KTM 1190 Adventure
No Mk1 ;(
"We've all been raised on television to believe that one day we'd all be millionaires, and movie gods, and rock stars. But we won't. And we're slowly learning that fact. So we build VDubs son..."

"Owning a MK1 varies between having sex to getting hit in the balls. Usually several times in one day."
PhatDub
Captain
Posts: 2120
Registered for: 17 years 8 months
Car Make: Audi, Volkswagen
Car Model: 2004 Avant 1.9TDi, Golf 4 1.6
Membership No: missing
Location: Oostersee, Cape Town
Contact:

Post by PhatDub »

those are really good pics eedubz

chickenlicken, congrats on the upgrade and look forward to the dyno sheets after the software has been done
"We ride together, we die together...Bad Boys for life"

PhatDub Waa'ntjie

PhatMom Vehicle
Exigo
Cadet
Posts: 79
Registered for: 18 years 7 months
Location: Johannesburg

Post by Exigo »

Interesting pictorial - while you had the intake manifold off - did you get a chance to look inside and if/how gunky the thing was...just interested in terms of our superior local fuel quality.
User avatar
Chicken Licken
Brigadier
Posts: 6308
Registered for: 17 years 8 months
Car Make: Volkswagen
Car Model: 1994 MK3 VR6
Membership No: 855
Location: Jo'burg

Post by Chicken Licken »

Thanks guys :)

It was a great day with Stu, Morne and Sean all in all ...

It too some fancy foot work to organise everything while I was in Denmark. This was all organised via PM’s, MSN, SMS’s and Email :wink: … So no one can say things can’t be done remotely :wink:

I gained so much knowledge about the diesel and what it is and capable of. As per G60 ... The 1.9 TDI block is bullet proof ... it's just the cooling, plumbing and ECU management that needs attention and before you know it you got a high spec hatch :twisted:

@ Eedubz - Dude ... thanks man, having you there really helped IMHO, from the balancing of time taking pictures and helping out with the logistics etc of the intercooler and placement of the pipes. Truly thankful for the help mate :wink:

@ RH - Nice One dude yesterday on pulling through it was lank helpful with delegating and sorting out piping too ... 8)

Image

^^^ I think It will fit Stu, check the lower tubing of panels on the left hand side … looks to be wide enough … Need to really see it in the flesh though :?

When she’s off the OEM map and loaded with the juice …:twisted: - You … Me … TLGP :twisted:

@ G60 - You made it all happen ;) ... I would not have the job done by anyone else. Your work is so meticulous and clean man! You have carnal knowledge of VW’s that even to this minute make me think if I could just plug in your brain and download your VW file that would be super! :D

Next on the cards is FRC (awaiting Preggie to return to SA from a quick trip abroad) – and yes … you got dib’s on a spin ;) :D btw - A special thanks to Tony for the use of his Garage please Morne :wink:

@ MeTsU – Top man! :D … Nice one for keeping things under wraps for so long. Hehe

@ PHATBOY - Thanks dude … ;) … Me too man … I think at the moment it’s about just over 100kw atw with the bigger turbo. Can feel a nice ‘kick’ when up to speed even with the stock OEM map.

@ Exigo – I asked Morne and he said It was quiet clean … hardly any gunk up. Personally I change oil every 7 500 km’s for good practice and ONLY Sasol ULS 50 ppm on fillup, I've done this since the day I drove it off the floor at 0km to now which is 26 300km on the clock.

Now - for a report back on the drive of the car. :)

- The Spool up in the plumbing takes a tad longer now with the added pull through the system of air cause of the intercooler. (Expected). Morne said the software will sort that out. (Yaay :D )
- Due to the delayed spooling the boost kicks in at 2.2k as before it was 1.9k (Expected). Morne confirmed that the software will also sort this out.
- The pull through the rpm range is stronger and longer, the Nm feels like it has more punch than before … Now you can only imagine what goes through your head on the post work the FRC map :twisted:

Image

^^^ Yes … It’s that nice to look at :D

Thanks to the 3 boy’s that took there Saturday out to do this. It was really a great experience (and sometimes challenging ;) ) … We do not speak of how much we removed the bumper :lol:

8)
Sean

Daily & Vent:
'14 SG FORD Wildtrak 4x4 - 'Stockish'
'94 OB VR6 - Stock
Ex:
'14 PW
GTI - 'Stock' - SOLD
'07 UG GTI - Modified - SOLD

"Lending my cars to you is a bit like lending your girlfriend to a porn star. Yes, you'll get her back but you just know she'll never be the same again... she'll always be wanting more"
MK2 G60
Lieutenant-Colonel
Posts: 4007
Registered for: 17 years 8 months
Car Make: vw
Membership No: 388
Location: canada

Post by MK2 G60 »

There is one pic missing her though.

EEDUBZ with the ring round his mouth after blowing on the pipes. :P

Guys it was a long day but was fun at the same time.

Let me know when the frc map is on mate. :twisted:

Now its roadhoags turn??????
G60 16V GOLF

WHAT WE LEAVE BEHIND IS NOT AS IMPORTANT AS HOW WE LIVED.

IT IS NOT UNSAFE IT IS OLD SCHOOL!!!!!!!!!

ALDO IS THE MAN WITH A GUN.
THATS HOW WE ROLL [SAINT-J]
GTS KNOWS HOW TO MAKE A STICKER.
RoadHaWg
VWCSA Member
Posts: 17470
Registered for: 20 years
Membership No: 731
Location: Joburg

Post by RoadHaWg »

g60 golf wrote:
Now its roadhoags turn??????
Yeah im saving...trust me.

But i think the VNT17 is too easy for u man.....VNT 20 will be more of a challenge!! :wink:
Stuart
2006 Jeep Wrangler "Sarge"
1966 Splitty.
2014 KTM 1190 Adventure
No Mk1 ;(
"We've all been raised on television to believe that one day we'd all be millionaires, and movie gods, and rock stars. But we won't. And we're slowly learning that fact. So we build VDubs son..."

"Owning a MK1 varies between having sex to getting hit in the balls. Usually several times in one day."
User avatar
Neuk
Treasurer
Treasurer
Posts: 49805
Registered for: 18 years 3 months
Car Make: Volkswagen
Car Model: Touareg 3.0 V6 TDi R-Line
Membership No: 806
Location: Johannesburg

Post by Neuk »

Hey boys

Nice work :!: Wish I could have been there to see this is I am planning on something similar when my car warranty/motorplan expires :D Saw the car in the flesh today and she looks awesome :D The intercooler looks really good behind the mesh and doesn't stand out in a ricy way at all :!: As Chicken said the 1.9 TDi engine is pretty much bomb proof, just the turbo and cooling that needs some work and software will always help :!: I can definately feel the effects of heat on my TDi during summer and the intercooler can only help :!:

I look forward to the updates once the new software has been installed and properly run in :D Oh - And I would like a drive someday :twisted:

@ G60 - As always, great work and great to have guys like yourself around to lend a helping hand :D I will definately be coming to you for help and suggestions/recommendations when I decide to do similar work on my TDi :D

Cheers
Nic
Current Garage:
Daily Drive: 2014 VW Touareg 3.0 V6 TDi R-Line
Project Fes: 1982 VW Golf GLS 1.5
Project FeO: 1966 VW Type 2 Transporter Kombi Split Window

Previous Garage:
Roxy: 2015 VW Golf R
Vagon: 2005 Audi B6 A4 1.8T (140kw) Avant
Project XXXX: 1967 VW Type 3 Variant (Squareback)
Project Betty: 2005 Polo 1.9 TDI (PD130) Sportline
Weekend Warrior: 1993 Volkswagen Caddy 2.0 16v ABF on ITB's
RoadHaWg
VWCSA Member
Posts: 17470
Registered for: 20 years
Membership No: 731
Location: Joburg

Post by RoadHaWg »

Neuk wrote:Hey boys

Nice work :!: Wish I could have been there to see this is I am planning on something similar when my car warranty/motorplan expires :D Saw the car in the flesh today and she looks awesome :D The intercooler looks really good behind the mesh and doesn't stand out in a ricy way at all :!: As Chicken said the 1.9 TDi engine is pretty much bomb proof, just the turbo and cooling that needs some work and software will always help :!: I can definately feel the effects of heat on my TDi during summer and the intercooler can only help :!:

I look forward to the updates once the new software has been installed and properly run in :D Oh - And I would like a drive someday :twisted:

@ G60 - As always, great work and great to have guys like yourself around to lend a helping hand :D I will definately be coming to you for help and suggestions/recommendations when I decide to do similar work on my TDi :D

Cheers
Nic
Me and you both man. Maybe we do a Ying + Yang dual project! 8) :lol:

Oh and we need to come up with some serious quantum physiscs **** to make a new cooler fit in our bumpers dude!! Its tighter than.....than.... (Due to lack of "P.C." expressions) Something really tight in there!!
Stuart
2006 Jeep Wrangler "Sarge"
1966 Splitty.
2014 KTM 1190 Adventure
No Mk1 ;(
"We've all been raised on television to believe that one day we'd all be millionaires, and movie gods, and rock stars. But we won't. And we're slowly learning that fact. So we build VDubs son..."

"Owning a MK1 varies between having sex to getting hit in the balls. Usually several times in one day."
Rabbit222
VAG Cafe
Posts: 19036
Registered for: 19 years 2 months
Car Make: Audi
Car Model: RS3
Membership No: 675
Location: Centurion
Contact:

Post by Rabbit222 »

Chicken! Well done bru, i'm really impressed with what ALL of you okes pulled off...brilliant I tell you!

@ Eedubz, shot for the pics bru...as always you don't dissappoint!
@ HaWG...your car is looking super sexy bru!
@ Morne', Dude you are without doubt the best mechie out there..keep up the great work buddy!
GB9
Major
Posts: 3271
Registered for: 18 years 1 month
Car Make: Audi
Car Model: 8V S3 Sedan
Location: Durban

Post by GB9 »

Unbelievable work right there :shock:

Chicken, how much did this set you back if you don't mind me asking? The FMIC looks wicked under that front bumper! Morne, would an FMIC fit under a stock F/L sportline?

You should maybe get something together and rival SAC with a bigger turbo/FMIC/Chip package of your own! I'd be a customer velly soon!
2015 Audi S3 Sedan : Nappa leather seats, LED headlights, Panoramic sunroof, rear PDC, B & O sound system
2010 VW Golf 6 GTi : RNS-510 Nav | Xenons | Adaptive Chassis Control
2005 VW Polo TDi (96kw) F/L
1996 Opel Kadett 160IS
1996 Citi Deco (Jazz Blue)
User avatar
Chicken Licken
Brigadier
Posts: 6308
Registered for: 17 years 8 months
Car Make: Volkswagen
Car Model: 1994 MK3 VR6
Membership No: 855
Location: Jo'burg

Post by Chicken Licken »

Rabbit222 wrote:Chicken! Well done bru, i'm really impressed with what ALL of you okes pulled off...brilliant I tell you!
Thanks Shaun :D Means alot coming from the guru of mod's himself :wink: :)
Sean

Daily & Vent:
'14 SG FORD Wildtrak 4x4 - 'Stockish'
'94 OB VR6 - Stock
Ex:
'14 PW
GTI - 'Stock' - SOLD
'07 UG GTI - Modified - SOLD

"Lending my cars to you is a bit like lending your girlfriend to a porn star. Yes, you'll get her back but you just know she'll never be the same again... she'll always be wanting more"
User avatar
Chicken Licken
Brigadier
Posts: 6308
Registered for: 17 years 8 months
Car Make: Volkswagen
Car Model: 1994 MK3 VR6
Membership No: 855
Location: Jo'burg

Post by Chicken Licken »

GB9 wrote:Unbelievable work right there :shock:

Chicken, how much did this set you back if you don't mind me asking? The FMIC looks wicked under that front bumper! Morne, would an FMIC fit under a stock F/L sportline?

You should maybe get something together and rival SAC with a bigger turbo/FMIC/Chip package of your own! I'd be a customer velly soon!
Price You have PM 8)

I does fit on the FL SL ... the bumper is more rounded and allows for the space ... the only reason why it 'fitted' mine (with some minor cutting and pasteing) was the Sportech lower bumper piece ... It's way more roomy than the OEM pre-face. :idea:
Sean

Daily & Vent:
'14 SG FORD Wildtrak 4x4 - 'Stockish'
'94 OB VR6 - Stock
Ex:
'14 PW
GTI - 'Stock' - SOLD
'07 UG GTI - Modified - SOLD

"Lending my cars to you is a bit like lending your girlfriend to a porn star. Yes, you'll get her back but you just know she'll never be the same again... she'll always be wanting more"
MK2 G60
Lieutenant-Colonel
Posts: 4007
Registered for: 17 years 8 months
Car Make: vw
Membership No: 388
Location: canada

Post by MK2 G60 »

Chicken is right it will fit the face lift.
In the pre face lift the cooler will have to be longer and flater
also the carrier might need to be cut to let the pipe work through.

This setup on Chickens car is very nice and neat.

Why oh why can't the factry do this??? :lol: :cry:
G60 16V GOLF

WHAT WE LEAVE BEHIND IS NOT AS IMPORTANT AS HOW WE LIVED.

IT IS NOT UNSAFE IT IS OLD SCHOOL!!!!!!!!!

ALDO IS THE MAN WITH A GUN.
THATS HOW WE ROLL [SAINT-J]
GTS KNOWS HOW TO MAKE A STICKER.
User avatar
Chicken Licken
Brigadier
Posts: 6308
Registered for: 17 years 8 months
Car Make: Volkswagen
Car Model: 1994 MK3 VR6
Membership No: 855
Location: Jo'burg

Post by Chicken Licken »

g60 golf wrote:Chicken is right it will fit the face lift.
In the pre face lift the cooler will have to be longer and flater
also the carrier might need to be cut to let the pipe work through.

This setup on Chickens car is very nice and neat.

Why oh why can't the factory do this??? :lol: :cry:
I concur batman ... :roll:

We should do a expose' to VWSA on upping power while maintaining ice particles shooting into the turbo intake with this setup :lol:

Thanks again Morne :o Can't stop saying thanks :P But it's something that never gets tiresome 8) :D

Oh ... and you have PM 8)
Sean

Daily & Vent:
'14 SG FORD Wildtrak 4x4 - 'Stockish'
'94 OB VR6 - Stock
Ex:
'14 PW
GTI - 'Stock' - SOLD
'07 UG GTI - Modified - SOLD

"Lending my cars to you is a bit like lending your girlfriend to a porn star. Yes, you'll get her back but you just know she'll never be the same again... she'll always be wanting more"
Tashen
Captain
Posts: 2533
Registered for: 17 years 10 months
Car Make: VW
Car Model: GTI 2.0 TFSI DSG
Membership No: 1016
Location: johannesburg

Post by Tashen »

It was my pleasure 8)
Cant wait to see how your car runs with the new map loaded.

@G60 : Morne your work is excellent. I'll definitely be bringing my GTi to you in the not so distant future for a beeger turbo conversion.

@Eedubz : Great pics buddy. :wink:
Daily Ride : 2012 Golf 6 GTI manual - Silver
Weekend Warrior : BMW E92 //M3 coupe - Space Grey on Fox Red
My Precious : 1991 325is Evo 2 - Calypso Red on Black
__________________________

Image
Tashen
Xcede Performance
073 265 1571
RoadHaWg
VWCSA Member
Posts: 17470
Registered for: 20 years
Membership No: 731
Location: Joburg

Post by RoadHaWg »

Tashen wrote:It was my pleasure 8)
Cant wait to see how your car runs with the new map loaded.

@G60 : Morne your work is excellent. I'll definitely be bringing my GTi to you in the not so distant future for a beeger turbo conversion.

@Eedubz : Great pics buddy. :wink:
Tashen bru!

How much did u get charged to return ur car to standard? Coz who ever told u it was a str8 bolt on conversion was telling porky pies!!
Stuart
2006 Jeep Wrangler "Sarge"
1966 Splitty.
2014 KTM 1190 Adventure
No Mk1 ;(
"We've all been raised on television to believe that one day we'd all be millionaires, and movie gods, and rock stars. But we won't. And we're slowly learning that fact. So we build VDubs son..."

"Owning a MK1 varies between having sex to getting hit in the balls. Usually several times in one day."
*ace*
Captain
Posts: 2406
Registered for: 18 years 1 month
Membership No: 1024
Location: Noordwyk

Post by *ace* »

:shock: :shock:
Well done guys!
Cant wait to see what she does with the FRC... YOH!
ugan
Image
Cupra_Ary
Major
Posts: 3003
Registered for: 17 years 6 months
Location: Johannesburg

Post by Cupra_Ary »

Hey Chicken - U skelm U :wink:
Wow dude, Nice to know we have some TDI die hards willing to mod their cars.

I'm sure ur car is going to fly and make some serious HP bro. Nice work.

Well done G60 (Morne'), ur work is outstanding as usual. We hope one day u open a Workshop, and I'll be ur 1st customer.

EeDubz - Great pics as usual too.

RoadHaWg - When u doing the mods boet?
RoadHaWg
VWCSA Member
Posts: 17470
Registered for: 20 years
Membership No: 731
Location: Joburg

Post by RoadHaWg »

Polo_Ary wrote: RoadHaWg - When u doing the mods boet?
im busy trying to work out which body parts i can do without!
both mine and the cars! :lol: :lol:
Stuart
2006 Jeep Wrangler "Sarge"
1966 Splitty.
2014 KTM 1190 Adventure
No Mk1 ;(
"We've all been raised on television to believe that one day we'd all be millionaires, and movie gods, and rock stars. But we won't. And we're slowly learning that fact. So we build VDubs son..."

"Owning a MK1 varies between having sex to getting hit in the balls. Usually several times in one day."
Tashen
Captain
Posts: 2533
Registered for: 17 years 10 months
Car Make: VW
Car Model: GTI 2.0 TFSI DSG
Membership No: 1016
Location: johannesburg

Post by Tashen »

RoadHaWg wrote: Tashen bru!

How much did u get charged to return ur car to standard? Coz who ever told u it was a str8 bolt on conversion was telling porky pies!!
:lol: Well the turbo is a direct bolt on...the intercooler not so str8 bolt on :lol:
Daily Ride : 2012 Golf 6 GTI manual - Silver
Weekend Warrior : BMW E92 //M3 coupe - Space Grey on Fox Red
My Precious : 1991 325is Evo 2 - Calypso Red on Black
__________________________

Image
Tashen
Xcede Performance
073 265 1571
RoadHaWg
VWCSA Member
Posts: 17470
Registered for: 20 years
Membership No: 731
Location: Joburg

Post by RoadHaWg »

Tashen wrote:
RoadHaWg wrote: Tashen bru!

How much did u get charged to return ur car to standard? Coz who ever told u it was a str8 bolt on conversion was telling porky pies!!
:lol: Well the turbo is a direct bolt on...the intercooler not so str8 bolt on :lol:
Hehe. good answer!!!
Stuart
2006 Jeep Wrangler "Sarge"
1966 Splitty.
2014 KTM 1190 Adventure
No Mk1 ;(
"We've all been raised on television to believe that one day we'd all be millionaires, and movie gods, and rock stars. But we won't. And we're slowly learning that fact. So we build VDubs son..."

"Owning a MK1 varies between having sex to getting hit in the balls. Usually several times in one day."
Post Reply